How to configure Wirecast for streaming to Lightcast
Overview
This article explains how to configure Wirecast to stream to a LIVE Channel in the Media Cloud using RTMP or SRT.
It covers connecting Wirecast to your LIVE Channel, configuring the recommended encoder settings, adding video and audio sources, and starting your stream.
Before you begin
Use this article when you want to stream to a Live Events Channel or Linear Stream Channel in the Media Cloud using Telestream Wirecast.
In this article, LIVE Channel refers to either a Live Events Channel or Linear Stream Channel.
Before you begin, make sure you have:
Wirecast installed on your computer
An active LIVE Channel in the Media Cloud
Access to your Media Cloud account
Your LIVE Channel streaming credentials if you are using Manual RTMP Setup or Manual SRT Setup
A connected camera, capture device, or media source
A stable upload connection
For step-by-step instructions on activating a LIVE Channel, see How to set up and ingest a Live Event stream or How to set up and ingest a 24/7 Linear Stream.
For instructions on finding your Stream Key, CDN Access Point, or SRT Streaming URL, see How to find your LIVE Channel stream credentials.
For general encoder setting recommendations, see Recommended encoder settings for live streaming.
How it works
Wirecast is a live production and encoding software that captures video and audio sources and sends the stream to a LIVE Channel.
Wirecast can connect to Lightcast in three ways:
Lightcast.com Output Destination — uses RTMP and may be available as a built-in destination in your version of Wirecast.
Manual RTMP Setup — uses the CDN Access Point and Stream Key from your LIVE Channel.
Manual SRT Setup — uses the SRT Streaming URL from your LIVE Channel.
If you want to stream using SRT, use Manual SRT Setup. The Lightcast.com Output Destination uses RTMP.
When Wirecast sends the stream to the Media Cloud, the LIVE Channel receives the stream and delivers it to your connected platforms, apps, and embedded players.
Using the recommended Wirecast settings helps the stream play more reliably across supported platforms. Incorrect or mismatched settings can cause buffering, playback errors, or no video.
Instructions
Prepare Wirecast and your stream credentials
Step 1
Download and install Telestream's Wirecast encoder on your computer.
Step 2
Choose how you want to connect Wirecast to Lightcast.
Use Lightcast.com Output Destination if it is available in your version of Wirecast.
Use Manual RTMP Setup if you want to enter the LIVE Channel’s CDN Access Point and Stream Key manually.
Use Manual SRT Setup if you want to stream using the LIVE Channel’s SRT Streaming URL.
To learn where to find these credentials, see How to find your LIVE Channel stream credentials.
Important: Keep your Stream Key and SRT Streaming URL private. Anyone with access to your streaming credentials may be able to send a stream to your LIVE Channel.
Configure the Lightcast.com Output Destination
Note: The Lightcast.com Output Destination in Wirecast uses RTMP streaming. To stream with SRT, use Manual SRT Setup instead.
Step 1
In Wirecast, click Output in the top menu.
Step 2
Click Output Settings.
Step 3
In the Select an Output Destination window, open the Destination dropdown.
If Lightcast.com appears in the dropdown list, select Lightcast.com and click OK.
If Lightcast.com does not appear in the dropdown list:
Step 4
Enter your Media Cloud username and click Authenticate.
Step 5
Enter your password when prompted.
Step 6
Select the LIVE Channel you want to stream to.
Step 7
Select your Encoding preset.
Step 8
Click OK to save the settings.
Wirecast is now configured to send an RTMP stream to your LIVE Channel using the Lightcast.com Output Destination.
Configure Manual RTMP setup
Step 1
In Wirecast, click Output in the top menu.
Step 2
Click Output Settings.
Step 3
Select RTMP Server as the destination.
Step 4
Paste the CDN Access Point into the Address field.
Step 5
Paste the Stream Key into the Stream field.
Step 6
Click OK to save the settings.
Wirecast is now configured to send an RTMP stream to your LIVE Channel.
Configure Manual SRT setup
Step 1
In Wirecast, click Output in the top menu.
Step 2
Click Output Settings.
Step 3
Select SRT: Secure Reliable Transport as the destination.
Step 4
Copy the SRT Streaming URL from the Media Cloud.
The SRT Streaming URL includes the destination address, port, and Stream ID in one full URL. Before entering the information into Wirecast, separate the URL into the required fields.
For example, if your SRT Streaming URL is:
srt://ingest-na1-srt.live.lightcast.com:5001?streamid=1278148#60a247108be022be9aef7de46437b0bf
Enter the information in Wirecast like this:
Wirecast field | What to enter |
|---|---|
Address | Enter the destination address before the port number. Example: |
Port | Enter the number after the colon and before |
Stream ID | Remove |
Step 5
Click OK to save the settings.
Wirecast is now configured to send an SRT stream to your LIVE Channel in the Media Cloud.
Configure encoder settings
Step 1
In Output Settings, locate the Encoding dropdown.
Step 2
Click the gear icon next to Encoding.
Step 3
Select Edit or New Preset.
Step 4
Configure the recommended video settings.
Setting | Recommended value |
|---|---|
Video Codec | H.264 |
Profile | High recommended; Baseline may be used when required for device or encoder compatibility |
Frame Rate | 30 FPS |
Keyframe Interval | 2 seconds |
Rate Control | CBR |
If Wirecast asks for keyframes by frame count instead of seconds, set the keyframe value to double your frame rate. For example, if your frame rate is 30 FPS, set the keyframe interval to 60 frames.
Step 5
Set your streaming bitrate.
Resolution | Recommended bitrate |
|---|---|
720p | 2,000–2,500 kbps |
1080p | 5,000–8,000 kbps |
For best results, your available upload bandwidth should be at least twice the total bitrate of your stream, including video and audio. This provides additional capacity for network fluctuations and helps maintain a stable live stream.
Step 6
Configure the recommended audio settings.
Setting | Recommended value |
|---|---|
Audio Codec | AAC |
Audio Bitrate | 128 kbps |
Audio Sample Rate | 44.1 kHz or 48 kHz |
Step 7
Save your encoder preset.
Add your video or audio source
Step 1
In the main Wirecast interface, click the + icon.
Step 2
Select the source type you want to use.
For example, select Video Capture if you want to use a camera or capture device.
Step 3
Choose your camera, capture device, or media source.
If you need to add a separate audio device, repeat the same process and select the audio device you want to use.
Step 4
Click the arrow button to add the source to the live window.
Your video preview should now appear in Wirecast.
Save, record, and start streaming
Step 1
Optional: Save your Wirecast settings.
Click File and select Save As. Enter a file name and save your Wirecast setup.
Saving your settings can help you reuse the same Wirecast setup for future streams.
Step 2
Optional: Configure local recording if you want Wirecast to record a copy of your stream.
Click the Record icon at the top of Wirecast and configure the folder where the recording should be saved.
A local recording can be used as a backup file after the broadcast.
Step 3
Review your audio output settings.
You can use the microphone control in Wirecast to mute or unmute audio being sent to viewers.
You can use the headphone control to turn local monitoring on or off. This affects what you hear through your computer headphones or speakers, but it does not affect what viewers hear.
Step 4
Click the Stream icon at the top of Wirecast when you are ready to begin streaming.
Confirm the stream is being received in the Media Cloud
Step 1
Return to the Media Cloud.
Step 2
Open the LIVE Channel where you are sending the stream.
Step 3
Confirm that the incoming stream is detected and playing as expected.
Allow a short amount of time for the stream to appear after you begin broadcasting.
Step 4
Verify that both video and audio are playing correctly before beginning your broadcast.
Stop the stream
Step 1
When your broadcast is finished, return to Wirecast.
Step 2
Click the Stream icon again to stop sending the stream.
Step 3
Return to the Media Cloud and confirm that the LIVE Channel is no longer receiving the active stream.
Troubleshooting
The stream is not detected in the Media Cloud
Verify that Wirecast is actively streaming and that the stream is being sent to the correct LIVE Channel.
If you are using Manual RTMP Setup, confirm that the CDN Access Point and Stream Key were copied correctly.
If you are using Manual SRT Setup, confirm that the complete SRT Streaming URL was copied correctly and separated into the required Wirecast fields.
Video appears, but there is no audio
Confirm that an audio source is selected in Wirecast.
Also confirm that your audio settings use AAC audio, a supported audio bitrate, and a supported audio sample rate.
The stream buffers or disconnects
Check your available upload bandwidth and reduce the bitrate if necessary.
For best results, your available upload bandwidth should be at least twice the total bitrate of your stream, including video and audio.
Use a wired connection whenever possible and avoid large uploads, downloads, backups, or other bandwidth-heavy activity during the broadcast.
SRT does not connect
Confirm that the complete SRT Streaming URL was copied correctly from the Media Cloud.
Make sure the destination address, port, and Stream ID were entered into the correct Wirecast fields.
Lightcast.com does not appear as a Wirecast destination
If Lightcast.com does not appear as a Wirecast destination, use Manual RTMP Setup instead.
You can still send an RTMP stream to your LIVE Channel by entering the CDN Access Point and Stream Key manually.
For additional troubleshooting guidance, see Recommended encoder settings for live streaming and Troubleshooting encoder connection and buffering issues.
FAQs
Should Wirecast use the Lightcast.com Output Destination, Manual RTMP Setup, or Manual SRT Setup?
The Lightcast.com Output Destination can be simpler if it is available in your version of Wirecast because it allows you to connect to your Media Cloud account from Wirecast. This setup uses RTMP streaming.
Manual RTMP Setup gives you more control over the connection and uses the CDN Access Point and Stream Key from the LIVE Channel’s STREAM tab.
Manual SRT Setup uses the SRT Streaming URL from the Media Cloud. SRT can provide a more resilient connection between your encoder and Lightcast, especially when streaming over networks with packet loss, variable bandwidth, or longer geographic distances.
Where can I find my Stream Key, CDN Access Point, or SRT Streaming URL?
Your LIVE Channel stream credentials are located in the LIVE Channel’s STREAM tab.
For step-by-step instructions, see How to find your LIVE Channel stream credentials.
What bitrate should be used in Wirecast?
Use a bitrate that matches your resolution, encoder capacity, and available upload speed.
Resolution | Recommended bitrate |
|---|---|
720p | 2,000–2,500 kbps |
1080p | 5,000–8,000 kbps |
For best results, your available upload bandwidth should be at least twice the total bitrate of your stream, including video and audio.
Why is the LIVE Channel not showing video after Wirecast starts streaming?
Common causes include an incorrect Stream Key, incorrect CDN Access Point, incorrect SRT Streaming URL, Wirecast not actively streaming, or a bitrate that exceeds the available upload bandwidth.
Verify your output settings in Wirecast and confirm that the stream is being sent to the correct LIVE Channel.
Should Wirecast be set to High or Baseline profile?
High is recommended for most live streaming workflows.
Baseline may be used when required for device compatibility, encoder compatibility, or a specific streaming setup.
Can Wirecast record the live stream while streaming?
Yes. Wirecast can record a local copy of your stream while it is broadcasting. Configure recording settings before starting the stream.
A local recording can be helpful as a backup file after the live event.
Can Wirecast be used for Multi-Bitrate Streaming?
Yes, Wirecast can be used for Multi-Bitrate Streaming if your LIVE Channel has been configured for it and your encoder or network setup can support multiple outputs.
Multi-Bitrate Streaming requires additional Channel configuration before you adjust your Wirecast setup. For more information, see Understanding multi-bitrate live streaming.






































