How to choose a live encoder for streaming to Lightcast

Edited

Overview

This article explains how to choose a software encoder, hardware encoder, or live production system for streaming to a LIVE Channel in the Media Cloud.

It covers compatibility requirements and key production considerations to review before choosing an encoder.


When to use this guide

Use this guide when:

  • You are setting up live streaming for the first time

  • You are choosing between a software encoder, hardware encoder, or live production system

  • You want to confirm whether an existing encoder is compatible with Lightcast

  • You are planning a production workflow with cameras, switchers, projection, or multiple outputs

  • You are considering purchasing a hardware encoder

Before choosing an encoder, make sure your equipment, internet connection, and production workflow can support the stream quality you want to deliver.

For general encoder setting recommendations, see Recommended encoder settings for live streaming.


How it works

Lightcast does not require one specific live encoder. You can use a software encoder, hardware encoder, or compatible live production system as long as it can send a supported stream to your LIVE Channel in the Media Cloud.

At minimum, your encoder should be able to:

  • Encode video using H.264

  • Encode audio using AAC

  • Send an RTMP or SRT stream

  • Use the streaming credentials provided by your LIVE Channel

  • Maintain a stable bitrate appropriate for your available upload bandwidth

For recommended resolution, bitrate, frame rate, keyframe interval, audio settings, and other configuration details, see Recommended encoder settings for live streaming.

Some encoders also support advanced workflows, such as multiple outputs, backup streaming, Multi-Bitrate Streaming, captions, recording, or live production switching.

The best encoder depends on your production needs, technical experience, budget, and live streaming environment.


Encoder options

Software encoders

Software encoders run on a computer and use the computer’s CPU, GPU, capture devices, and network connection to send the stream.

Common software encoder options include:

Software encoders may be a good option when:

  • You already have a computer available for streaming

  • You need a flexible, lower-cost setup

  • You want to add cameras, screen captures, graphics, media files, or other production elements

  • You have someone available who is comfortable managing computer software, capture devices, and network settings

Software encoders depend heavily on the computer and connected devices. For best results, use a dedicated computer with enough processing power, memory, and upload bandwidth for your stream.

Hardware encoders

Hardware encoders are dedicated devices built for capturing, encoding, and sending live video.

Hardware encoders may be a good option when:

  • You prefer a dedicated device designed specifically for live encoding

  • You stream frequently or for important live events

  • You want to reduce the risk of computer software updates, background processes, or system instability affecting the stream

  • Your production setup uses cameras, switchers, audio mixers, or other professional video equipment

  • You need multiple outputs, backup streams, or more advanced production features

Many professional hardware encoders can work with Lightcast as long as they support the required streaming protocol, codecs, and encoder settings.

Examples of hardware encoders and production devices that may be used with Lightcast include:

  • Blackmagic ATEM devices, such as the ATEM Mini Pro

  • TriCaster production systems

  • Teradek Prism

  • Harmonic XOS

  • AWS Elemental encoders

Lightcast does not require a specific encoder brand or model. Before choosing a hardware encoder, confirm that the device supports your required video format, audio format, streaming protocol, inputs, outputs, and stream settings.

Software encoder vs. hardware encoder

Consideration

Software encoder

Hardware encoder

Cost

Usually lower

Usually higher

Setup

Requires a suitable computer

Dedicated device

Flexibility

High

Depends on device

Portability

Depends on computer/setup

Often compact and portable

Reliability

Depends on computer and software

Designed specifically for encoding

Best suited for

Flexible or lower-cost productions

Frequent or mission-critical streaming

Live production systems

Some live production systems, such as TriCaster-style production systems, can combine switching, graphics, recording, and streaming in one workflow.

These systems can be used with Lightcast if they can send a supported stream to your LIVE Channel using the required settings.


What to consider before choosing an encoder

Stream format and compatibility

Make sure the encoder can output a supported video and audio format.

At minimum, the encoder should support:

  • H.264 video

  • AAC audio

  • RTMP streaming, or SRT streaming if you plan to use SRT

  • Custom streaming server URLs and credentials

  • A stable bitrate that matches your available upload bandwidth

If your stream needs to work across a broad range of supported devices and platforms, confirm that the encoder supports compatible H.264 settings.

For exact encoder setting recommendations, see Recommended encoder settings for live streaming.

Upload bandwidth

Your available upload bandwidth should be at least twice the total bitrate of your stream, including video and audio.

For example, if your encoder sends a 6,000 kbps video stream and 128 kbps audio stream, your upload connection should have enough capacity to support at least twice that total bitrate.

If you are sending multiple streams at the same time, include all streams in your total bitrate calculation.

Outputs and destinations

Consider how many outputs or destinations your production workflow requires.

A simple setup may only need one live stream sent to one LIVE Channel in the Media Cloud.

More advanced production workflows may require additional outputs, such as:

  • Multiple live stream destinations

  • Multiple bitrate streams, if you are using Multi-Bitrate Streaming rather than Bitrate-Adaptive Cloud Transcoding

  • A backup live stream

  • A separate stream for social or external platforms

  • Local recording

  • Video outputs for production monitors, projectors, or other displays

Network streams require upload bandwidth and encoder processing resources, while local recordings and video outputs may require additional processing power, storage, or physical connections.

Before choosing an encoder, confirm that it can support the number and type of outputs your production workflow requires.

Production equipment

Make sure your encoder can connect to your video and audio equipment.

Depending on your setup, this may include:

  • Cameras

  • Capture cards

  • SDI or HDMI inputs

  • Audio mixers

  • Video switchers

  • Presentation computers

  • Converters or splitters

  • Projectors or display screens

Before purchasing an encoder, confirm that it supports the input and output connections your production setup requires.

Consider your local production outputs

You may be able to use the same video signal for both projection and live streaming, depending on your equipment.

Common options include:

  • Use an HDMI or SDI splitter to send the signal to both the encoder and projector

  • Use a video switcher with multiple outputs

  • Use multiple outputs from the camera, if supported

  • Use an output from the hardware encoder, if supported

  • Use an output from the computer’s graphics card if you are using a software encoder

Before your event, test the full signal path from the camera or switcher to the projector and encoder. This helps confirm that the projector and live stream both receive the expected video signal.

Advanced features

Depending on your workflow, you may also need an encoder or production system that supports features such as:

  • Multiple stream outputs

  • Backup streaming

  • Local recording

  • Caption input

  • Multiple camera inputs

  • Presentation or screen capture

  • Remote configuration

  • Integration with advanced advertising or production workflows

If you need advanced features, confirm that the encoder or production system supports them before purchasing, configuring, or relying on the device for a live event.

Multi-Bitrate Streaming

Lightcast supports two ways to provide multiple stream qualities to viewers: Multi-Bitrate Streaming and Bitrate-Adaptive Cloud Transcoding.

With Multi-Bitrate Streaming, your encoder creates and sends multiple versions of the live stream at different bitrates and resolutions to Lightcast. Your encoder must support multiple simultaneous streams, and your internet connection must have enough upload bandwidth for the combined bitrate of all streams.

With Bitrate-Adaptive Cloud Transcoding, you send a single stream to Lightcast. The stream is then transcoded in the cloud into multiple qualities for adaptive playback. Bitrate-Adaptive Cloud Transcoding is an additional paid service.

If you plan to use Multi-Bitrate Streaming, confirm that the encoder can generate the number of stream qualities you need and that your available upload bandwidth can support all streams simultaneously.

If you prefer to send a single stream and have Lightcast create the additional stream qualities, contact Customer Support about Bitrate-Adaptive Cloud Transcoding.


Next steps

After choosing your encoder:

  • Review Recommended encoder settings for live streaming for the correct video, audio, bitrate, and keyframe settings

  • Find the streaming credentials for your LIVE Channel in the Media Cloud

  • Configure your encoder and send a test stream before your live event

  • If you are using OBS Studio, Wirecast, or vMix, follow the encoder-specific setup instructions


FAQs

Does Lightcast require a specific live encoder?

No. Lightcast does not require one specific live encoder.

You can use any compatible software encoder, hardware encoder, or live production system that supports the required streaming format and can send the stream to your LIVE Channel in the Media Cloud.


Does Lightcast recommend specific encoder settings?

Yes. Your encoder should use settings that are compatible with Lightcast streaming.

For general recommendations, see Recommended encoder settings for live streaming.


Can I use a hardware encoder?

Yes. Hardware encoders can be used with Lightcast as long as they support the required video format, audio format, streaming protocol, and stream credentials.

Examples of hardware encoders and production devices that may be used with Lightcast include Blackmagic ATEM devices, TriCaster production systems, Teradek Prism, Harmonic XOS, and AWS Elemental encoders.

Lightcast does not require a specific encoder brand or model. Before choosing a hardware encoder, confirm that it works with your cameras, audio sources, switchers, network setup, and required stream settings.


Can I use TriCaster or a similar live production system?

Yes. TriCaster-style live production systems can be used with Lightcast if they can send a supported stream to your LIVE Channel.

Make sure the system can output the required video and audio format and can connect using the stream credentials from the Media Cloud.


Should I use a software encoder or a hardware encoder?

A software encoder may be a good choice if you want a flexible setup and have a dedicated computer available for streaming.

A hardware encoder may be a better choice if you want a dedicated device designed specifically for frequent or important live broadcasts.

The best option depends on your production needs, available equipment, technical experience, and budget.


Can I use the same video signal for projection and live streaming?

Yes, in many cases. You may be able to split the video signal, use a video switcher with multiple outputs, use multiple camera outputs, use an encoder output, or use a computer graphics output.

Test the setup before your live event to make sure the projector and encoder both receive the expected signal.


Can I use a free software encoder for testing?

Yes. A free software encoder may be useful for testing, training, or simple streaming workflows.

For important live events or frequent broadcasts, use a setup that is reliable, tested, and appropriate for your production needs.


Do I need an encoder that supports Multi-Bitrate Streaming?

Not always.

If you are using Multi-Bitrate Streaming, your encoder must be able to send multiple versions of the stream at different bitrates and resolutions.

If you are using Bitrate-Adaptive Cloud Transcoding, you send one stream to Lightcast and Lightcast creates the additional stream qualities in the cloud. Bitrate-Adaptive Cloud Transcoding is an additional paid service.


Additional related resources

Was this article helpful?

Sorry about that! Care to tell us more?

Thanks for the feedback!

There was an issue submitting your feedback
Please check your connection and try again.