Recommended export settings for VOD uploads
Overview
This article explains the recommended video and audio export settings for preparing Video On Demand (VOD) files before uploading them to the Media Cloud. It covers file format, video codec, frame rate, resolution, bitrate, and audio settings.
When to use the recommended export settings
Use these settings when you are exporting a video file for upload to the Media Cloud.
These recommendations are helpful when you want to:
Prepare a VOD file for reliable upload and encoding
Keep file sizes manageable without reducing playback quality unnecessarily
Help your video play consistently across web, mobile, OTT, and other supported platforms
Avoid playback issues caused by unsupported formats or variable frame rates
These recommendations apply no matter which video editing software or transcoding tool you use, as long as the tool allows you to export with the required format, codec, frame rate, resolution, bitrate, and audio settings.
Before exporting, make sure your video editing project is finalized.
How it works
When you upload a VOD file to the Media Cloud, the file is sent to Lightcast’s encoding farm, where it is encoded and prepared for streaming. Using standardized export settings helps the file encode correctly and remain compatible across supported playback devices.
Video export settings affect both quality and file size. Higher bitrates, frame rates, or resolutions do not always improve the viewer experience. In some cases, they can increase rendering time, upload time, storage usage, and encoding time without providing a noticeable improvement in playback quality.
For best results, use H.264 video, AAC-LC audio, MP4 format, and a constant frame rate that matches the original source file.
Instructions
Step 1
Export the video as an MP4 file.
Step 2
Set the video codec to H.264 (AVC).
H.264 is recommended because it provides strong video quality while keeping file sizes efficient. This helps reduce upload time, processing time, and storage usage.
Step 3
Select Baseline Profile or Main Profile for the H.264 setting.
Step 4
Set the frame rate to match the original frame rate of your source file.
Use a constant frame rate. Do not use a variable frame rate, because variable frame rates may cause playback inconsistencies.
Supported common frame rates include:
FPS |
23.98 |
24 |
25 |
29.97 |
30 |
50 |
59.94 |
60 |
For best results, use a constant frame rate that matches the original source file. Do not convert the frame rate unless needed for your editing workflow.
Step 5
Set the resolution to match your original source file whenever possible.
Common resolutions include:
Format | Resolution |
Standard Definition (SD) 4:3 aspect ratio | 640 x 480 |
Standard Definition (SD) 16:9 aspect ratio | 640 x 360 |
720p HD 16:9 aspect ratio | 1280 x 720 |
1080p Full HD 16:9 aspect ratio | 1920 x 1080 |
2K 16:9 aspect ratio | 2560 x 1440 |
4K UHD 16:9 aspect ratio | 3840 x 2160 |
DCI 4K UHD 17:9 aspect ratio | 4096 x 2160 |
4K Monoscopic 360 2:1 aspect ratio | 4096 x 2048 |
4K Stereoscopic 360 2:1 aspect ratio | 4096 x 2048* |
*Stereoscopic video should be uploaded with the left and right views stacked on top of each other as 4096 x 1024, using a 4:1 aspect ratio for each eye.
Step 6
Set the video bitrate based on the resolution of your video.
For HD content, use a bitrate between 3 and 5 Mbit/s. You can use a lower bitrate for SD content and a higher bitrate for 4K content.
If your editing software offers bitrate options, use variable bitrate for VOD exports and select a value that fits your resolution and quality needs. You can adjust the bitrate if the exported file is too large or if the visual quality is not acceptable.
Recommended bitrate ranges include:
Quality | Bitrate (Mbps) |
SD | 1 - 2 |
720p | 2 - 5 |
1080p | 5 - 10 |
2K | 10 - 20 |
4K | 20 - 40 |
Step 7
Set the audio codec to AAC-LC (Advanced Audio Codec - Low Complexity).
Step 8
Set the audio channels to Stereo.
For best results, use 2-channel stereo audio because it is widely supported across web, social, OTT, and mobile platforms.
Step 9
Set the audio data rate to 320 kbit/s.
Use a constant audio data rate.
Step 10
Set the audio sample rate to 48 kHz.
If the source file is already set to 48 kHz or lower, you can leave the sample rate as is. You do not need to set the sample rate above 48kHz.
Step 11
After exporting the file, upload it to your Media Cloud archive.
MP4 files up to 4 GB can be uploaded through the Web Uploader. Larger files may require another upload method such as FTP or another supported upload workflow. See How to choose a media upload method in the Media Cloud.
FAQs
Can any video editing software be used?
Yes. You can use any video editing software or transcoding tool that can export files using the recommended VOD settings. For best results, export the file as MP4 with H.264 video, AAC-LC audio, and a constant frame rate that matches the original source file.
Can a different video codec be used?
H.264 (AVC) is the recommended codec for VOD uploads. Other codecs may be accepted, but H.264 is recommended for the best balance of quality, file size, upload efficiency, processing time, and playback compatibility.
Can variable frame rate video be uploaded?
Variable frame rate is not recommended. Use a constant frame rate to help prevent playback inconsistencies.
What file format should be used for VOD uploads?
Export the file as an MP4 file using the H.264 video codec and AAC-LC audio codec.
Can a file be converted to MP4 by changing the file extension?
Changing a file extension, such as changing .mov to .mp4, does not convert the file. Video formats and containers use different file structures and metadata, so a file that was renamed this way may not pass file inspection or enter transcoding.
To create an MP4 file, export or transcode the file from your editing software or a video transcoding tool. For best results, use the recommended VOD settings: MP4 format, H.264 video, and AAC-LC audio.
Does a higher bitrate always improve video quality?
No. Higher bitrates can increase rendering time, upload time, storage usage, and processing time without improving playback quality. Use the recommended bitrate range for your resolution.
